|
| |
|
|
Design of chemically resistant coatings using secondary raw materials and hazardous waste
Stodolovská, Šárka ; Jakubík, Aleš (referee) ; Drochytka, Rostislav (advisor)
On the basis of theoretical knowledge gained from Czech and foreign technical literature, two types of coatings using fillers based on secondary raw materials, including hazardous waste, is designed and experimentally verified. The expected use of the proposed coating systems, both PREMIUM and ECOLOGY, is the protection of building structures that are permanently stressed by increased chemical stress. When designing the PREMIUM coating material, emphasis is primarily focused on chemical resistance and functional parameters, and the ecological performance of the raw materials used is monitored primarily with the ECOLOGY coating material. In both cases, it is important to maintain a favorable price / value ratio.
|
|
| |
|
|
Immobilization of heavy metals in the cement matrix with the admixture of natural zeolite
Semerádová, Nikol ; Bayer, Patrik (referee) ; Vyšvařil, Martin (advisor)
Heavy metals released to the natural ecosystem constitute significant risks not only for organisms, but also for water supplies in the nature. There are a number of analytical methods for the determination of heavy metals. Each of them is suitable for different element and its character. Since the results of the analysis are applied during the solidification and stabilization, it is necessary to ensure the highest correlation between hazardous waste and solidification medium for maximum inhibition of toxic ions. This work investigates the stabilization of heavy metals binders based on cement base with admixture of the natural zeolite and its possible use for the solidification of heavy metals in soluble form.
|
|
| |
|
|
Design of grout joint for chemical exposure using secondary raw materials
Matušková, Veronika ; Hodná, Jana (referee) ; Drochytka, Rostislav (advisor)
The aim of the bachelor’s thesis is the design of a high-quality polymeric grout joint using secondary raw materials and hazardous waste for increased chemical exposure. The main use assumed of the proposed grout joint is grouting of the cast basalt elements in building objects that are systematically exposure due to the highly aggressive chemical load. The use of input materials produced by progressive technologies should be another benefit of this grout joint to enhance the ecological aspects of the grout joint production.
|
|
|
Development of new chemically resistant coating system containing secondary raw materials
Stodolovská, Šárka ; Jakubík, Aleš (referee) ; Drochytka, Rostislav (advisor)
New types of highly chemically resistant coating systems, primarily designed for concrete and metal substrates are designed and experimentally verified within the diploma thesis. Secondary raw materials, including solidified hazardous waste, are used as microfillers. The developed coating system is solved in two quality levels – PREMIUM and ECOLOGY. The level of PREMIUM is mainly designed for environments where extreme chemical stress is occurring. The polymer coating systém ECOLOGY can be used in environments where aggressive chemical media also act, however the ecological foot of the input raw materials is most important. The diploma thesis is dealing with current issues in the practice and it is the part of the research project.
|
|
|
SPECIAL POLYMER COATINGS AND SCREEDS MATERIALS WITH USE OF SECONDARY RAW MATERIALS
Žlebek, Tomáš ; Seidlová, Michaela (referee) ; Bydžovský, Jiří (referee) ; Ďurica, Tibor (referee) ; Drochytka, Rostislav (advisor)
The work deals with the development of new polymeric coatings and screeds – epoxy, polyurethane and vinyl ester materials with the use of hazardous waste in the form of fillers. The areas that are destined for their landfill are constantly expanding and the costs of disposing of this waste are high. Their use eliminates negative impacts on the environment, but also leads to significant financial savings. The aim of this PhD thesis was to find a suitable way to treat selected hazardous waste and experimentally verify the possibilities of using the fillers pre-treated by optimal way in polymer coatings and screeds. The coatings and screeds are intended primarily for concrete substrates but the possibility of use on metal substrates, asphalt and cement-bonded particle boards was also been verified. These materials serve as a secondary protection of structures against the adverse effects of weather conditions. Secondary raw materials were used as fillers, which were fluidized bed combustion fly ash contaminated due to flue gas denitrification and specially pre-treated hazardous waste (solidification products). The aim was to proceed progressive use of the secondary raw materials as much as possible in order to reduce landfilling in the maximum possible way. It was necessary to treat hazardous waste in such a way that the most effective solidification would be achieved. The behavior of the solidifaction products in the polymer matrix, the distribution of particles in the structure and the disruption of coatings and screeds due to chemical stress were also investigated.
|
|
|
Development of new chemically resistant coating system containing secondary raw materials
Stodolovská, Šárka ; Jakubík, Aleš (referee) ; Drochytka, Rostislav (advisor)
New types of highly chemically resistant coating systems, primarily designed for concrete and metal substrates are designed and experimentally verified within the diploma thesis. Secondary raw materials, including solidified hazardous waste, are used as microfillers. The developed coating system is solved in two quality levels – PREMIUM and ECOLOGY. The level of PREMIUM is mainly designed for environments where extreme chemical stress is occurring. The polymer coating systém ECOLOGY can be used in environments where aggressive chemical media also act, however the ecological foot of the input raw materials is most important. The diploma thesis is dealing with current issues in the practice and it is the part of the research project.
|
|
|
Design of chemically resistant coatings using secondary raw materials and hazardous waste
Stodolovská, Šárka ; Jakubík, Aleš (referee) ; Drochytka, Rostislav (advisor)
On the basis of theoretical knowledge gained from Czech and foreign technical literature, two types of coatings using fillers based on secondary raw materials, including hazardous waste, is designed and experimentally verified. The expected use of the proposed coating systems, both PREMIUM and ECOLOGY, is the protection of building structures that are permanently stressed by increased chemical stress. When designing the PREMIUM coating material, emphasis is primarily focused on chemical resistance and functional parameters, and the ecological performance of the raw materials used is monitored primarily with the ECOLOGY coating material. In both cases, it is important to maintain a favorable price / value ratio.
|
guest ::
